Site Information

 Loading... Please wait...
  • Image 1

Generic GoPro and Yi Mounts made from TPU (£6.00 to £9.00)

£6.00
Quantity:

Product Description

These Generic Mounts are designed to be adapted to almost any Quadcopter frame or other RC Vehicle that has mounting screws that would allow for securing the mount to a surface.

Note: You will need to create your own holes and trim the mount to fit.  You need to determine if you have compatible mounting points on your Quadcopter frame or other RC Vehicle.

Size of Mounts

  • GoPro Screw Mount - 62.4mm wide X 75mm deep
  • GoPro 3/4 Mount - 62.4mm wide x 75mm deep
  • Yi Mount - 62.9mm wide x 75mm deep

Instructions:

  1. Measure your mounting points and subtract one half millimeter.  For instance, if you have 2 screws 28mm apart from each other record 27.5mm.  Due to the TPU having flexible characteristics this 1/2mm reduction will allow the mount to be tight on your frame or mounting surface.
  2. Determine and mark where you want to drill holes in the mount.  Take care to be accurate.  You need to consider where the camera will be sitting once mounted so it does not impede mouting your battery or sit too far forward.
  3. Secure the mount in a vise taking care not to marr the mount.
  4. Using a sharp drill bit carefull drill the holes in the mount.  Since the mount is flexible take care not to create a situation where the mount itself can twist.  It is important that your drill bit is sharp.
  5. Determine if you need to trim the mount in any way.  If so, mark the mount and carefully trip with a sharp razor blade or industrial type scissors.  Strong regular scissors may also work.
  6. Mount will come with 4 3mm washers.  Use these washers when mounting to your frame or other surface.  If you drill holes other than 3mm you should source washers for the screws that are used.

Note about Warranty:

This TPU Mount is not covered by the Limited Lifetime warranty that all other TPU parts are covered under.  This is due to us not being able to control how you drill or cut the mount.  It is up to you to determine how this mount will be used.  If you have any questions please reach out to us.  We do guarantee that you will recieve a quality printed product that comes as described and should perform well based on a good installation.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the Generic GoPro and Yi Mounts made from TPU (£6.00 to £9.00) to your wish list.