This is a Camera/VTX mount for the Blade Inductrix. It fits the ever popular Quanum/HK/Banggood Micro Camera/vtx combo. Weighs in at ~0.85g when printed with TPU, holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.
20 degree mount Works well with the 1.8 lense on these cameras.
All stock hardware is used, super simple installation. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Solder your power wires to the Battery input pads and your ready to fly.
UPDATE: Added 0 and 10 degree mounts in a lite configuration, also added a Lite 20 degree. Go Whoop it up!
This mount was designed by NorCal3d and a portion of this sell will go to the designer.
Posted by Unknown on 3rd Oct 2016
I am very impressed about a fast delivery and the quality of the mount. The Material is a little soft, so you have an light Vibration damping!
Design good with flexible material
Posted by DH on 29th Jul 2016
Print quality not the greatest but this is probably due to flexible print material.
Camera fits snug and is easy to fit.
There is a hole for cam power cable so you have to fit camera before soldering to inductrix.
Tiny Whoop Upgrade
Posted by Michael Ellicott on 12th Jun 2016
I thought long and hard as to should i stick the cam to the top of the FC, i am 100% pleased that i bought this instead, it fits great if a little snug, i thought the screw holes were to tight but once its together its bloody perfect, and VERY light, far better than tape anyday !